IPv6 Address Type Identifier
Identify an IPv6 address type: global, unique local, link-local, multicast scope, NAT64, 6to4, or Teredo, with decoded fields and the solicited-node group.
Try IPv6 Address Type Identifier →What Does the IPv6 Address Type Identifier Do?
Paste any IPv6 address and the identifier tells you which block it belongs to, which RFC defines it, and whether it is routed on the public internet. It then decodes the fields that block carries: the Global ID and subnet ID of a unique local address, the scope and flags of a multicast group, the IPv4 address inside a NAT64, 6to4, or IPv4-mapped address, and the server, port, and client address hidden inside a Teredo address.
For unicast addresses it also shows the solicited-node multicast group used by Neighbor Discovery, and, when the interface ID contains ff:fe in the middle, the MAC address it was probably built from. Everything runs in your browser.
How Do I Identify an IPv6 Address?
- Open IP Tools > IPv6 Planner and choose the Address Types tab.
- Paste an IPv6 address. A zone index (
%eth0) or a prefix length is accepted and ignored. - Click Identify or press Enter, or click one of the example buttons.
- Read the type badge, the defining RFC, and whether the address is routable on the internet.
- Check the decoded fields below, and copy any value with its copy icon.
- To create private addressing for a lab or site, click Generate ULA prefix for a random fd00::/8 /48.
Which IPv6 Address Types Are There?
- Global unicast (2000::/3): public, internet-routable addresses.
- Unique local (fc00::/7, in practice fd00::/8): private addresses for use inside a site, like RFC 1918 space in IPv4 (RFC 4193).
- Link-local (fe80::/10): valid on one link only; every IPv6 interface has one.
- Multicast (ff00::/8): one-to-many groups; the fourth hex digit is the scope (2 = link-local, 5 = site-local, e = global).
- Loopback (::1) and unspecified (::): this host, and no address yet.
- Transition and translation: IPv4-mapped (::ffff:0:0/96), NAT64 (64:ff9b::/96), 6to4 (2002::/16), and Teredo (2001::/32).
- Documentation: 2001:db8::/32 and 3fff::/20 (RFC 9637) are reserved for examples and must never be routed.
What Is a Solicited-Node Multicast Address?
IPv6 has no ARP broadcast. To find the MAC address of a neighbor, a host sends a Neighbor Solicitation to the solicited-node multicast group of the target: ff02::1:ff followed by the last 24 bits of the target address. For fe80::21a:2bff:fe3c:4d5e that group is ff02::1:ff3c:4d5e. Only hosts whose addresses end in the same 24 bits listen to it, so address resolution reaches a handful of hosts instead of the whole link.
What Can It Not Tell You?
The identifier works from the address text alone. It cannot tell whether an address is in use, who it is assigned to, or whether it is reachable. For ownership, use an RDAP or Whois lookup. A MAC address recovered from an EUI-64 interface ID is a strong hint, not proof: software can write any interface ID, and most modern hosts use random interface IDs (RFC 8981 and RFC 7217) for privacy.
Use Cases
- Log and packet review: tell link-local, ULA, and global addresses apart at a glance.
- Troubleshooting Neighbor Discovery: get the solicited-node group to filter in a capture.
- Legacy tunnels: decode the IPv4 endpoints inside 6to4 and Teredo addresses.
- Private addressing: generate a random ULA /48 instead of reusing fd00::/48.
Frequently Asked Questions
What is the IPv6 equivalent of a private IP address?
Unique local addresses (ULA) in fc00::/7, which in practice means fd00::/8 followed by a random 40-bit Global ID. They are routed inside a site but not on the internet, like 10.0.0.0/8 or 192.168.0.0/16 in IPv4.
Why does every IPv6 interface have an fe80 address?
Every IPv6 interface must have a link-local address in fe80::/10. Neighbor Discovery and router advertisements use it to talk on the local link before or without any global address.
How is the random ULA prefix generated?
The page picks a 40-bit Global ID with the browser cryptographic random generator. RFC 4193 requires the Global ID to be pseudo-random and only suggests a SHA-1 recipe, so a cryptographic random value meets the requirement.
Can I use 2001:db8:: addresses on my network?
No. 2001:db8::/32 and 3fff::/20 are reserved for documentation and examples. Use a ULA prefix for private networks and your assigned global prefix for public ones.
What do the multicast scope values mean?
The fourth hex digit of a multicast address is its scope: 1 interface-local, 2 link-local, 4 admin-local, 5 site-local, 8 organization-local, and e global. Routers do not forward a group beyond its scope.