MAC Address and OUI Lookup
Find the vendor behind a MAC address, decode unicast, multicast and random MAC bits, convert notations, and derive EUI-64 IPv6 addresses in your browser.
Try MAC Address and OUI Lookup →What Does the MAC Address Lookup Do?
The MAC Address and OUI Lookup tells you which manufacturer a network interface belongs to, using the first three octets (the OUI) that the IEEE assigns to each vendor. It also decodes the two control bits in the first octet, recognizes broadcast and well-known multicast addresses, shows the address in every common notation, generates random locally administered MACs, and converts a MAC to its modified EUI-64 IPv6 interface ID and back.
The vendor table is bundled with the page: a curated subset of the IEEE MA-L registry covering the vendor families most often seen on business and home networks. No lookup leaves your browser, and nothing is stored.
How Do I Look Up a MAC Address?
- Open LAN & Home > MAC / OUI Lookup from the top menu.
- Paste a MAC address in any notation: colons (
f0:d1:a9:12:34:56), dashes, Cisco dots (f0d1.a912.3456), or bare hex. A 6-digit OUI prefix also works. - Read the vendor line, the I/G and U/L bits, and any special-address note.
- Click the copy icon next to a notation to copy it in the format your switch, firewall, or script expects.
- For many addresses, open the Bulk tab, paste one per line, click Look up all, then copy CSV or TSV or download a .csv file.
- Use the Random MAC tab to generate locally administered addresses for VMs or lab gear, and the EUI-64 tab to derive an IPv6 address from a MAC or recover a MAC from an EUI-64 address.
Why Does My Phone Show No Vendor?
iPhones, Android phones, and Windows laptops use a private, randomized MAC address on WiFi by default. Those addresses set the U/L (locally administered) bit, which means software picked the address and no vendor OUI applies. The tool reports these as locally administered rather than guessing a manufacturer. To see the real hardware address, check the device's WiFi settings, where the private address option can be turned off per network.
What Do the I/G and U/L Bits Mean?
- I/G (bit 0x01 of the first octet): 0 means an individual (unicast) address for one interface; 1 means a group address, used for multicast and broadcast.
- U/L (bit 0x02 of the first octet): 0 means universally administered, so the OUI belongs to a real vendor; 1 means locally administered, set by software, a hypervisor, or a phone's privacy feature.
- A random unicast MAC therefore has a first octet ending in 2, 6, A, or E in hex.
How Is an EUI-64 Address Built From a MAC?
Modified EUI-64 (RFC 4291, Appendix A) splits the 48-bit MAC in half, inserts ff:fe in the middle, and flips the U/L bit. The MAC 00:11:22:33:44:55 becomes the interface ID 0211:22ff:fe33:4455, so on the link-local prefix the address is fe80::211:22ff:fe33:4455. Because this exposes the hardware address, most hosts now use temporary privacy addresses (RFC 4941 and RFC 8981) or stable opaque IDs (RFC 7217) for global addresses. An interface ID without ff:fe in the middle was not derived from a MAC.
Where Does the Vendor Data Come From?
The vendor table was generated on 2026-11-16 from the IEEE Registration Authority MA-L (24-bit OUI) registry and is shipped with the page. It is a curated subset: the vendor families most common on networks (switch, router, firewall, WiFi, phone, PC, NAS, printer, camera, and smart-home makers). Addresses outside the subset report "not in the bundled subset". The 28-bit (MA-M) and 36-bit (MA-S) blocks are not included. For any other vendor, search the full registry at regauth.standards.ieee.org.
Use Cases
- Unknown device on the network: identify the maker of a device from the router's client list or a switch MAC table.
- Switch and firewall work: convert between Cisco dot, dash, and colon notation for MAC ACLs and port security.
- Packet captures: recognize LLDP, STP, CDP, IPv4 and IPv6 multicast destinations at a glance.
- Labs and virtualization: generate safe locally administered MACs for VMs and containers.
- IPv6 troubleshooting: check whether an address was built from a MAC with EUI-64.
Frequently Asked Questions
Does the MAC lookup send my addresses anywhere?
No. The vendor table is bundled with the page and every lookup runs in your browser. Nothing is uploaded, logged, or stored.
Why does a MAC address say it is not in the bundled subset?
The page ships a curated subset of the IEEE MA-L registry covering the most common network vendors, not all of the roughly 40,000 assignments. For other vendors, search the full IEEE registry at regauth.standards.ieee.org.
What is a locally administered MAC address?
A MAC address with the U/L bit (0x02 of the first octet) set. Software chose it rather than a manufacturer, so it has no vendor. Randomized private WiFi addresses on phones and laptops, virtual machines, and containers use this range.
Can two devices have the same MAC address?
Vendors assign universal MACs uniquely, but software can set any address, and randomized MACs are chosen at random. A duplicate on one network segment breaks traffic for both devices, so generate random MACs only in the locally administered range.
What MAC address formats are accepted?
Colon-separated (aa:bb:cc:dd:ee:ff), dash-separated (AA-BB-CC-DD-EE-FF), Cisco dotted (aabb.ccdd.eeff), and bare 12-digit hex, in upper or lower case. A 6-digit OUI prefix such as F0-D1-A9 is also accepted.