← All Docs

Next Available CIDR Block Finder

Find the next unused, correctly aligned subnets inside a parent CIDR block, skipping every range already allocated. Size by prefix or by host count.

Try Next Available CIDR Block Finder →

What Does the Next Available Finder Do?

Give it a parent block, the blocks already in use, and the size you need, and it returns the first free blocks of that size that start on a valid boundary. It is the step an IP address management system does when you ask for "the next /26", without needing an IPAM system.

Used entries outside the parent are ignored and flagged, and entries that only partly overlap the parent are flagged too, so mistakes in your used list do not go unnoticed.

How Do I Find the Next Free Subnet?

  1. Open IP Tools > CIDR Toolkit from the top menu and choose the Next Available tab.
  2. Enter the parent block, for example 10.0.0.0/24.
  3. Paste the blocks already allocated into Already used, one per line.
  4. Choose Size by prefix length or hosts needed, and enter the value.
  5. Enter How many blocks you need (up to 256).
  6. Press Find blocks and read the list, plus any notices about flagged entries or too little space.
  7. Use Copy or Download .txt to record the allocation.

Why Was a Free Range Skipped?

A free range is only usable for a block if it contains a correctly aligned start. A /26 can only begin at .0, .64, .128, or .192. If the free space runs from .160 to .191, it holds 32 addresses but no aligned /26, so the finder moves on. Use the Gap Finder to see every free range at its own size.

What Can It Not Do?

The finder only knows what you paste. It cannot see which addresses are actually routed or assigned on your network, so keep the used list current, or export it from your IPAM, DHCP server, or cloud console first.

Frequently Asked Questions

How do I find the next available /24 in a /16?

Enter the /16 as the parent, paste the /24s already in use, choose Prefix length, enter 24, and press Find blocks. The first free /24 is listed first.

Can I ask for a size in hosts instead of a prefix?

Yes. Choose Hosts needed and enter the count. The tool picks the smallest block that holds that many usable hosts, for example 100 hosts needs a /25 in IPv4.

What if there is not enough space?

The tool lists the blocks it could find and states how many it found against how many you asked for. If none fit, use the Gap Finder to see what free space is left.

Does it work with IPv6?

Yes. For example, enter a /48 as the parent and ask for /64 networks to find the next unused subnet IDs.

Is my allocation list stored?

No. Every calculation runs in your browser with exact 128-bit math. Nothing you paste is uploaded, logged, or saved, and the page works the same offline once loaded.