← All Docs

CIDR Split Calculator

Split an IPv4 or IPv6 CIDR block into equal subnets by prefix length, subnet count, or hosts per subnet, with ranges and usable host counts for each.

Try CIDR Split Calculator →

What Does the CIDR Split Calculator Do?

The CIDR Split Calculator divides one block into equal-sized subnets. You choose how: by the target prefix length (/24 into /26), by the number of subnets you need (rounded up to the next power of two), or by the number of hosts each subnet must hold. The result lists every subnet with its address range and, for IPv4, its usable host count.

Totals are exact even for huge splits such as an IPv6 /48 into 65,536 /64 networks. The table shows the first 1,024 rows and says so; the rest follow the same step.

How Do I Split a Network?

  1. Open IP Tools > CIDR Toolkit from the top menu and choose the Split tab.
  2. Enter the block to split, for example 192.168.10.0/24.
  3. Choose Split by: target prefix, number of subnets, or hosts per subnet.
  4. Enter the value, for example 26, 6, or 60.
  5. Press Split or Enter, then read the subnet count, the prefix, and the table.
  6. Use Copy or Download .txt to keep the subnet list.

How Many Hosts Fit in Each Subnet?

An IPv4 subnet with prefix length p holds 2 to the power of (32 minus p) addresses. The first is the network address and the last is the broadcast address, so a /26 has 64 addresses and 62 usable hosts. Point-to-point /31 links use both addresses (RFC 3021) and a /32 is a single host. IPv6 has no broadcast address, so every address counts. When you split by hosts, the calculator picks the smallest subnet that still fits that many usable hosts.

When Should I Use VLSM Instead?

This tool makes equal-sized subnets. If departments need different sizes, for example one subnet of 100 hosts and three of 20, use the VLSM Calculator or the Subnet Planner, which place subnets of different sizes inside one block.

Frequently Asked Questions

How do I split a /24 into four subnets?

Enter the /24, choose Number of subnets, and enter 4. Four subnets need two extra prefix bits, so the result is four /26 networks of 64 addresses and 62 usable hosts each.

Why did asking for 6 subnets give me 8?

Equal CIDR subnets come in powers of two. Six subnets need three extra prefix bits, which makes eight. Use the first six and keep the other two for growth.

Can it split IPv6 prefixes?

Yes. For example, a /48 site prefix split into /64 networks gives 65,536 subnets. The count is exact, and the table lists the first 1,024.

What does usable hosts mean?

In IPv4, the network and broadcast addresses of a subnet cannot be assigned to devices, so usable hosts is the total minus two. The exceptions are /31 point-to-point links with 2 usable addresses and /32 with 1.

Is anything I enter stored?

No. Every calculation runs in your browser with exact 128-bit math. Nothing you paste is uploaded, logged, or saved, and the page works the same offline once loaded.